DS3163 Maxim Integrated Products, DS3163 Datasheet - Page 276

• Manufacturer Part Number: DS3163
• Description: IC TRPL ATM/PACKET PHY 400-PBGA
• Manufacturer: Maxim Integrated Products

Specifications of DS3163

• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 400-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Bit 8: Framing Error Latched (FEL) – This bit is set when a framing error is detected. The type of framing error
event that causes this bit to be set is determined by T3.RCR.FECC[1:0]
Bit 3: C-bit Parity Error Count Latched (CPECL) – This bit is set when the CPEC bit transitions from zero to one.
This bit is set to zero in M23 DS3 mode.
Bit 2: Remote Error Indication Count Latched (FBECL) – This bit is set when the FBEC bit transitions from zero
to one. This bit is set to zero in M23 DS3 mode.
Bit 1: P-bit Parity Error Count Latched (PECL) – This bit is set when the PEC bit transitions from zero to one.
Bit 0: Framing Error Count Latched (FECL) – This bit is set when the FEC bit transitions from zero to one.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Bit #
Name
Default
Bit 11: T3 Framing Format Mismatch Interrupt Enable (T3FMIE) – This bit enables an interrupt if the T3FML bit
is set and the bit in GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
Bit 10: Application Identification Channel Interrupt Enable (AICIE) – This bit enables an interrupt if the AICL bit
is set and the bit in GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
Bit 9: DS3 Idle Signal Change Interrupt Enable (IDLEIE) – This bit enables an interrupt if the IDLEL bit is set and
the bit in GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
Bit 8: Receive Unframed All 1’s Interrupt Enable (RUA1IE) – This bit enables an interrupt if the RUA1L bit is set
and the bit in GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
Bit 7: Out Of Multiframe Interrupt Enable (OOMFIE) – This bit enables an interrupt if the OOMFL bit is set and
the bit in GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
Bit 6: Severely Errored Frame Interrupt Enable (SEFIE) – This bit enables an interrupt if the SEFL bit is set and
the bit in GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
Reserved
OOMFIE
15
0
7
0
Reserved
SEFIE
14
0
6
0
T3.RSRIE1
T3 Receive Status Register Interrupt Enable #1
(1,3,5,7)2Ch
Reserved
COFAIE
13
0
5
0
Reserved
LOFIE
12
0
0
4
T3FMIE
RAIIE
11
0
3
0
AICIE
AISIE
10
0
2
0
IDLEIE
OOFIE
9
0
1
0
RUA1IE
LOSIE
8
0
0
0