DS3163 Maxim Integrated Products, DS3163 Datasheet - Page 57

• Manufacturer Part Number: DS3163
• Description: IC TRPL ATM/PACKET PHY 400-PBGA
• Manufacturer: Maxim Integrated Products

Specifications of DS3163

• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 400-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RDXA[4:2]
RSOX
REOP
PIN
TYPE
Oz
Oz
O
In UTOPIA L2 or UTOPIA L3 modes, RPXA goes high when the polled port has
more than a programmable number of ATM cells ready for transfer ("almost empty"
level). RPXA goes low when the polled port does not have a complete ATM cell
ready for transfer.
In POS-PHY L2 mode, RPXA goes high when the polled port contains more data
than the "almost empty" level or has an end of packet ready for transfer. RPXA goes
low when the port does not have an end of packet ready for transfer and is "almost
empty".
In UTOPIA L2 (reset default) or POS-PHY L2 modes, this signal is driven when one
of the ports is being polled, and is tri-stated when none of the ports is being polled or
when data path reset is active.
In UTOPIA L3 mode this signal is driven.
RSX: This signal is active in POS-PHY L3 modes and indicates the start of a data
transfer. This signal is updated on the rising edge of RSCLK.
RSX goes high immediately before the start of data transfer to indicate that the in-
band port address is present on RDATA. RSX goes high when the value of RDATA
is the address of the receive port from which data is to be transferred. When RSX
goes low, all subsequent transfers will be from the port specified by the in-band
address. When RSX is high, RVAL must be low.
This signal is always driven in POS-PHY L3 mode.
Receive Direct cell/packet Available [4:2]
RDXA[4:2]: This signal is used to indicate when the associated port can send data
to the ATM/Link layer device. This signal is updated on the rising edge of RSCLK.
In UTOPIA L2 or UTOPIA L3 modes, RDXA goes high when the associated port has
more than a programmable number of ATM cells ready for transfer ("almost empty"
level). RDXA goes low when the associated port does not have a complete ATM cell
ready for transfer.
In POS-PHY L2 mode, RDXA goes high when the associated port contains more
data than the "almost empty" level or has an end of packet ready for transfer. RDXA
goes low when the associated port does not have an end of packet ready for transfer
and is "almost empty".
In POS-PHY Level 3 (or SPI-3) mode or when polled status mode is selected, these
signals are held low.
Receive Start Of cell/packet (tri-state)
This signal is tri-state when global reset is applied.
RSOX: This signal is used to indicate the first transfer of a cell/packet. This signal is
updated on the rising edge of RSCLK.
In UTOPIA L2 or UTOPIA L3 modes, RSOX is used to indicate the first transfer of a
cell.
In POS-PHY L2 or POS-PHY L3 modes, RSOX is used to indicate the first transfer of
a packet.
In UTOPIA L2 (reset default) or POS-PHY L2 modes, this signal is driven when one
of the ports is selected for data transfer, and tri-stated when REN is deasserted,
none of the ports is selected or data path reset is active.
In UTOPIA L3 or POS-PHY L3 modes this signal is driven.
Receive End Of Packet (tri-state)
This signal is tri-state when global reset is applied.
REOP: In POS-PHY L2 or POS-PHY L3 modes, this signal is used to indicate the
last transfer of a packet. This signal is updated on the rising edge of RSCLK.
In UTOPIA L3 mode, this signal is held low.
In POS-PHY L2 mode, this signal is driven when one of the ports is selected for data
transfer, and tri-stated when REN is deasserted, none of the ports is selected or data
path reset is active.
In UTOPIA L2 (reset default) mode this signal is tri-stated.
In all UTOPIA L3 or POS-PHY L3 modes this signal is driven.
FUNCTION