SAF-C161U-LF V1.3 Infineon Technologies, SAF-C161U-LF V1.3 Datasheet - Page 338

no-image

SAF-C161U-LF V1.3

Manufacturer Part Number
SAF-C161U-LF V1.3
Description
IC MCU ISDN 16BIT TTL TQFP-100
Manufacturer
Infineon Technologies
Series
C16xxr
Datasheet

Specifications of SAF-C161U-LF V1.3

Core Processor
C166
Core Size
16-Bit
Speed
36MHz
Connectivity
EBI/EMI, SPI, UART/USART, USB
Peripherals
POR, PWM, WDT
Number Of I /o
56
Program Memory Type
ROMless
Ram Size
3K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
100-LFQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Program Memory Size
-
Data Converters
-
Other names
SAFC161ULFV1.3X
SAFC161ULFV13XP
SP000007502
Data Sheet
The detailed register description is shown below.
USBCLC
Table 74
The state of the USB interface kernel clock is controlled by the register bit USBDISR.
The actual USB kernel clock state will be shown by the state bit USBDIS.
The register USBCLC is clocked with the bus clock to be able to switch the USB interface
controller clock on again, if it was off. If required, switching off the clock can be prevented
by the USB controller.
For on chip debugging support (OCDS) an additional bit USBGPSEN is introduced to
stop the peripheral clock for arbitrary lengths of time during debugging if this function is
enabled. If debugging mode is active, the peripheral core rejects write access to
registers connected to the peripheral clock.
To be compatible with previous C16x products an USBEX_DISR signal is provided to
disable the peripheral clock.
Bit No. Bit
(15:4)
3
2
1
0
USBEX_DIS
USBGPSEN
USBDIS
USBDISR
Reset Value: 0000
USBCLC Register
H
Function
reserved. Always ’0’
USB Controller Clock Disable
0: The kernel clock of the USB interface
1: The kernel clock of the USB interface controller is
USB Controller Clock OCDS Disable
0: The kernel clock of the USB interface
1: The kernel clock of the USB interface controller is
USB Controller Clock Status
0: The status of the USB interface
1: The status of the USB interface controller clock
USB Controller Clock Disable
0: The kernel clock of the USB interface
1: The kernel clock of the USB interface controller is
controller is enabled, normal operation.
disabled.
controller is enabled, normal operation.
disabled during debugging mode (OCDS)
controller kernel clock is ’enabled’.
is ’disabled’.
controller is enabled, normal operation.
disabled.
338
USB Interface Controller
2001-04-19
C161U

Related parts for SAF-C161U-LF V1.3