SAF-C161U-LF V1.3 Infineon Technologies, SAF-C161U-LF V1.3 Datasheet - Page 61

• Manufacturer Part Number: SAF-C161U-LF V1.3
• Description: IC MCU ISDN 16BIT TTL TQFP-100
• Manufacturer: Infineon Technologies
• Series: C16xxr

Specifications of SAF-C161U-LF V1.3

• Core Processor: C166
• Core Size: 16-Bit
• Speed: 36MHz
• Connectivity: EBI/EMI, SPI, UART/USART, USB
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Type: ROMless
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Other names: SAFC161ULFV1.3X; SAFC161ULFV13XP; SP000007502

Modifications of the direction of port pins (input or output) become effective only after the
instruction following the modifying instruction. As bit instructions (BSET, BCLR) use
internal read-modify-write sequences accessing the whole port, instructions modifying
the port direction should be followed by an instruction that does not access the same port
(see example below).
WRONG:
RIGHT:
The instruction following an instruction that changes the system configuration via register
SYSCON (eg. segmentation, stack size) cannot use the new resources (eg. stack). In
these cases an instruction that does not access these resources should be inserted.
The instruction following an instruction that changes the properties of an external
address area cannot access operands within the new area. In these cases an instruction
that does not access this address area should be inserted. Code accesses to the new
address area should be made after an absolute branch to this area.
Note: As a rule, instructions that change external bus properties should not be executed
Instruction pipelining reduces the average instruction processing time in a wide scale
(from four to one machine cycles, mostly). However, there are some rare cases, where
a particular pipeline situation causes the processing time for a single instruction to be
extended either by a half or by one machine cycle. Although this additional time
represents only a tiny part of the total program execution time, it might be of interest to
avoid these pipeline-caused time delays in time critical program modules.
Besides a general execution time description, the following section provides some hints
on how to optimize time-critical program parts with regard to such pipeline-caused timing
particularities.
Data Sheet
Initialization of Port Pins
Changing the System Configuration
BUSCON/ADDRSEL
Timing
from the respective external memory area.
BSET
BSET
BSET
NOP
BSET
DP3.13
P3.5
DP3.13
P3.5
; change direction of P3.13 to output
; P3.13 is still input, the rd-mod-wr reads pin P3.13
; change direction of P3.13 to output
; P3.13 is now output,
; any instruction not accessing port 3
; the rd-mod-wr reads the P3.13 output latch
61
Central Processor Unit
2001-04-19
C161U