MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 1009

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

Freescale Semiconductor, Inc.
BIT1ERR
BIT0ERR
CRCERR
FRMERR
ACKERR
STFERR
TXWRN
Field
15
14
13
12
11
10
9
Otherwise it will be set when the WRNEN is set again. Writing ‘0’ has no effect. This bit is not updated
during Freeze mode.
0
1
Bit1 Error
This bit indicates when an inconsistency occurs between the transmitted and the received bit in a
message.
NOTE: This bit is not set by a transmitter in case of arbitration field or ACK slot, or in case of a node
0
1
Bit0 Error
This bit indicates when an inconsistency occurs between the transmitted and the received bit in a
message.
0
1
Acknowledge Error
This bit indicates that an Acknowledge Error has been detected by the transmitter node, i.e., a dominant
bit has not been detected during the ACK SLOT.
0
1
Cyclic Redundancy Check Error
This bit indicates that a CRC Error has been detected by the receiver node, i.e., the calculated CRC is
different from the received.
0
1
Form Error
This bit indicates that a Form Error has been detected by the receiver node, i.e., a fixed-form bit field
contains at least one illegal bit.
0
1
Stuffing Error
This bit indicates that a Stuffing Error has been detected.
0
1
TX Error Warning
No such occurrence
The Rx error counter transitioned from less than 96 to greater than or equal to 96.
No such occurrence
At least one bit sent as recessive is received as dominant.
No such occurrence
At least one bit sent as dominant is received as recessive.
No such occurrence
An ACK error occurred since last read of this register.
No such occurrence
A CRC error occurred since last read of this register.
No such occurrence
A Form Error occurred since last read of this register.
No such occurrence
A Stuffing Error occurred since last read of this register.
sending a passive error flag that detects dominant bits.
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
CANx_ESR1 field descriptions (continued)
Table continues on the next page...
Description
Chapter 41 CAN (FlexCAN)
1009