MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 605

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

28.4.4 Functional Modes of Operation
The FTFL module has two operating modes: NVM Normal and NVM Special. The
operating mode affects the command set availability (see
Configuration details of this device for how to activate each mode.
28.4.5 Flash Reads and Ignored Writes
The FTFL module requires only the flash address to execute a flash memory read. MCU
read access is available to all flash blocks.
The MCU must not read from the flash memory while commands are running (as
evidenced by CCIF=0) on that block. Read data cannot be guaranteed from a flash block
while any command is processing within that block. The block arbitration logic detects
any simultaneous access and reports this as a read collision error (see the
FSTAT[RDCOLERR] bit).
28.4.6 Read While Write (RWW)
The following simultaneous accesses are allowed:
Simultaneous operations are further discussed in
Operations.
Freescale Semiconductor, Inc.
• The user may read from one logical program flash memory space while commands
(typically program and erase operations) are active in the other logical program flash
memory space.
The MCU should never enter stop mode while any FTFL
command is running (CCIF = 0).
While the MCU is in very-low-power modes (VLPR, VLPW,
VLPS), the FTFL module does not accept flash commands.
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
CAUTION
NOTE
Allowed Simultaneous Flash
Table
Chapter 28 Flash Memory Module (FTFL)
28-25). Refer to the Chip
605