MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 483

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

22.4 Functional Description
The following sections describe functional details of the EWM module.
22.4.1 The EWM_out Signal
The EWM_out is a digital output signal used to gate an external circuit (application
specific) that controls critical safety functions. For example, the EWM_out could be
connected to the high voltage transistors circuits that control an AC motor in a large
appliance.
The EWM_out signal remains deasserted when the EWM is being regularly serviced by
the CPU within the programmable service window, indicating that the application code is
executed as expected.
The EWM_out signal is asserted in any of the following conditions:
On a normal reset, the EWM_out is asserted. To deassert the EWM_out, set EWMEN bit
in the CTRL register to enable the EWM.
If the EWM_out signal shares its pad with a digital I/O pin, on reset this actual pad defers
to being an input signal. It takes the EWM_out output condition only after you enable the
EWM by the EWMEN bit in the CTRL register.
When the EWM_out pin is asserted, it can only be deasserted by forcing a MCU reset.
Freescale Semiconductor, Inc.
COMPAREH
• Servicing the EWM when the counter value is less than CMPL value.
• If the EWM counter value reaches the CMPH value, and no EWM service has
• Servicing the EWM when the counter value is more than CMPL and less than CMPH
• After any reset (by the virtue of the external pull-down mechanism on the EWM_out
occurred.
values and EWM_in signal is asserted.
pin)
Field
7–0
To prevent runaway code from changing this field, software should write to this field after a CPU reset
even if the (default) maximum service time is required.
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
EWM_CMPH field descriptions
Description
Chapter 22 External Watchdog Monitor (EWM)
483