MC68EN360CAI25L Freescale Semiconductor, MC68EN360CAI25L Datasheet - Page 115

• Manufacturer Part Number: MC68EN360CAI25L
• Description: IC MPU QUICC 25MHZ 240-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MC68000r

Specifications of MC68EN360CAI25L

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 240-FQFP
• Core Size: 32 Bit
• Cpu Speed: 25MHz
• Embedded Interface Type: SCP, TDM
• Digital Ic Case Style: FQFP
• No. Of Pins: 240
• Supply Voltage Range: 4.75V To 5.25V
• Rohs Compliant: Yes
• Family Name: M68xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: FQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

Freescale Semiconductor, Inc.
Bus Operation
during an interrupt acknowledge cycle terminated by AVEC. The vector number supplied in
an autovector operation is derived from the interrupt level of the current interrupt. When the
AVEC signal is asserted instead of DSACKx during an interrupt acknowledge cycle, the
QUICC ignores the state of the data bus and internally generates the vector number (the
sum of the interrupt level plus 24 ($18)).
AVEC is multiplexed with IACK5. The AVEC bit in the port E pin assignment register
(PEPAR) controls whether the AVEC/IACK5 pin is used as an autovector input or as IACK5
(see Section 6 System Integration Module (SIM60) for additional information). AVEC is only
sampled during an interrupt acknowledge cycle; during all other cycles, AVEC is ignored.
Additionally, AVEC can be internally generated for external devices by programming the
autovector register (note that in this case AVEC pin will not be asserted externally). Seven
distinct autovectors can be used, corresponding to the seven levels of interrupt available
with signals IRQ7–IRQ1. Figure 4-28 shows the timing for an autovector operation.
MC68360 USER’S MANUAL
For More Information On This Product,
Go to: www.freescale.com