MC68EN360CAI25L Freescale Semiconductor, MC68EN360CAI25L Datasheet - Page 327

• Manufacturer Part Number: MC68EN360CAI25L
• Description: IC MPU QUICC 25MHZ 240-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MC68000r

Specifications of MC68EN360CAI25L

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 240-FQFP
• Core Size: 32 Bit
• Cpu Speed: 25MHz
• Embedded Interface Type: SCP, TDM
• Digital Ic Case Style: FQFP
• No. Of Pins: 240
• Supply Voltage Range: 4.75V To 5.25V
• Rohs Compliant: Yes
• Family Name: M68xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: FQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

7.1 RISC CONTROLLER
The RISC controller is the 32-bit central controller of the communication processor module
(CPM). Since its execution occurs on a separate bus that is hidden from the user, it does
not impact CPU32+ core performance. The RISC controller works with the serial channels
and parallel interface port (PIP) to implement the user-chosen protocols and to manage the
SDMA channels that transfer data between the SCCs and memory. The RISC controller
contains an internal timer that can be used to implement up to 16 additional timers for the
user application software. These features are collectively known as the communication pro-
cessor (CP), which is a subset of the overall CPM. Additionally, the RISC controller can
manage the operation of the IDMA channels, if desired. The 32-bit RISC handles the lower
layer tasks and DMA control activities, leaving the 32-bit CPU32+ core (or other external
processor) free to handle higher layer activities. Thus, the QUICC can be thought of as a
dual 32-bit processor system.
The RISC controller communicates with the host (CPU32+ core or other external processor)
in several ways. First, many parameters are exchanged through the dual-port RAM. In the
case of simultaneous accesses (at least one of which is a write operation), the RISC con-
troller may be delayed by one clock in its access to the dual-port RAM. The host is never
delayed. Second, the RISC controller can execute special commands issued by the host.
These commands are only required to be issued in special situations. Third, the RISC con-
troller can generate interrupts through the CPM interrupt controller. Fourth, status/event reg-
isters, which show events that have occurred within the RISC, may be read at any time by
the CPU32+ or an external processor.
The RISC controller has the ability to control a set of up to 16 timers. These timers are sep-
arate and distinct from the four general-purpose timers and baud rate generators in the
CPM. The 16 timers are ideally used in protocols that do not require extreme precision, but
in which it is desirable to off-load the host CPU from having to scan the timer tables that are
created in software. These timers are clocked from an internal timer used only by the RISC
controller.
The RISC controller uses the peripheral bus to communicate with all of its peripherals. Each
SCC has a separate receive and transmit FIFO. The SCC1 FIFOs are 32-bytes each; the
other SCC FIFOs are 16-bytes each. The SMC and SPI FIFO sizes are double-buffered.
The PIP is a single register interface.
The following priority scheme determines the processing priority of the RISC controller. It is
as follows:
1. Reset in CP Command Register or System Reset
2. DMA Bus Error
3. Commands Issued to the CP Command Register
4. CC1 Rx
5. SCC1 Tx
6. SCC2 Rx
7. SCC2 Tx
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68360 USER’S MANUAL
Go to: www.freescale.com
RISC Controller