MC68EN360CAI25L Freescale Semiconductor, MC68EN360CAI25L Datasheet - Page 619

• Manufacturer Part Number: MC68EN360CAI25L
• Description: IC MPU QUICC 25MHZ 240-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MC68000r

Specifications of MC68EN360CAI25L

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 240-FQFP
• Core Size: 32 Bit
• Cpu Speed: 25MHz
• Embedded Interface Type: SCP, TDM
• Digital Ic Case Style: FQFP
• No. Of Pins: 240
• Supply Voltage Range: 4.75V To 5.25V
• Rohs Compliant: Yes
• Family Name: M68xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: FQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

Freescale Semiconductor, Inc.
Serial Management Controllers (SMCs)
data), data will begin to be transmitted on the next falling edge of SMCLK after one character
of ones is transmitted. If the transmit FIFO is loaded at some later time, the data will begin
transmission after some multiple number of all-ones characters is transmitted. The transmit-
ter will never lose synchronization again, regardless of the state of SMSYNx, until the TEN
bit is cleared by the user or the ENTER HUNT MODE command is issued.
If both the REN and TEN bits are set in SMCMR, the first falling edge of the SMSYNx pin
causes both the transmitter and receiver to achieve synchronization. To re-synchronize the
transmitter, the SMC transmitter may be disabled and reenabled, and the SMSYNx pin can
be used again to re-synchronize just the transmitter. See 7.11.5 Disabling the SMCs on the
Fly for a description of how to safely disable and reenable the SMC (simply clearing TEN
and setting TEN may not be sufficient). The receiver may be re-synchronized in a similar
fashion.
7.11.10.7 USING THE TSA FOR SYNCHRONIZATION. The TSA offers a method to syn-
chronize the SMC channel internally without using the SMSYNx pin. This behavior is similar
to that of the SMSYNx pin, except that the synchronization event is not the falling edge of
the SMSYNx pin, but rather the first time slot for this SMC receiver/transmitter following the
frame sync indication. See 7.8 Serial Interface with Time Slot Assigner for further informa-
tion on configuring time slots for the SMCs and SCCs.
The TSA allows the SMC receiver and transmitter to be enabled simultaneously, yet syn-
chronized separately, a capability not provided by the SMSYNx pin. See Figure 7-79 for an
example of synchronization using the TSA.
MC68360 USER’S MANUAL
For More Information On This Product,
Go to: www.freescale.com