DF3052BX25V Renesas Electronics America, DF3052BX25V Datasheet - Page 518

• Manufacturer Part Number: DF3052BX25V
• Description: MCU 5V 512K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of DF3052BX25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 13 Serial Communication Interface
13.4
The SCI has four interrupt request sources: TEI (transmit-end interrupt), ERI (receive-error
interrupt), RXI (receive-data-full interrupt), and TXI (transmit-data-empty interrupt). Table 13.12
lists the interrupt sources and indicates their priority. These interrupts can be enabled and disabled
by the TIE, TEIE, and RIE bits in SCR. Each interrupt request is sent separately to the interrupt
controller.
The TXI interrupt is requested when the TDRE flag is set to 1 in SSR. The TEI interrupt is
requested when the TEND flag is set to 1 in SSR. The TXI interrupt request can activate the
DMAC to transfer data. Data transfer by the DMAC automatically clears the TDRE flag to 0. The
TEI interrupt request cannot activate the DMAC.
The RXI interrupt is requested when the RDRF flag is set to 1 in SSR. The ERI interrupt is
requested when the ORER, PER, or FER flag is set to 1 in SSR. The RXI interrupt request can
activate the DMAC to transfer data. Data transfer by the DMAC automatically clears the RDRF
flag to 0. The ERI interrupt request cannot activate the DMAC.
The DMAC can be activated by interrupts from SCI channel 0.
Table 13.12 SCI Interrupt Sources
Interrupt
ERI
RXI
TXI
TEI
Rev. 3.00 Mar 21, 2006 page 488 of 814
REJ09B0302-0300
SCI Interrupts
Description
Receive error (ORER, FER, or PER)
Receive data register full (RDRF)
Transmit data register empty (TDRE)
Transmit end (TEND)
Priority
High
Low