DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 1225

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(4)
The PID bits in DCPCTR and PIPEnCTR are used to set the response PID for each pipe.
The following shows this module operation with various response PID settings:
• Response PID settings when the host controller function is selected:
Setup transactions for the DCP are set with the SUREQ bit.
• Response PID settings when the function controller function is selected:
For setup transactions, an ACK response is always returned, regardless of the PID setting, and the
USB request is stored in the register.
This module may carry out writing to the PID bits, depending on the results of the transaction.
• When the host controller function has been selected and the response PID is set by hardware:
The response PID is used to specify the execution of transactions.
A. NAK setting: Using pipes is disabled. No transaction is executed.
B. BUF setting: Transactions are executed based on the status of the buffer memory.
C. STALL setting: Using pipes is disabled. No transaction is executed.
The response PID is used to specify the response to transactions from the host.
A. NAK setting: The NAK response is always returned in response to the generated
B. BUF setting: Responses are made to transactions based on the status of the buffer memory.
C. STALL setting: The STALL response is always returned in response to the generated
A. NAK setting: In the following cases, PID = NAK is set and issuing of tokens is
Response PID
For OUT direction: If there are transmit data in the buffer memory, an OUT token is
For IN direction: If there is an area to receive data in the buffer memory, an IN token is
transaction.
transaction.
automatically stopped:
• When a transfer other than isochronous transfer has been performed and no response is
• When a corrupted packet is received in response to the transmitted token.
• When a short packet is received in the data stage of a control read transfer.
returned to the issued token.
issued.
issued.
Section 23 USB 2.0 Host/Function Module (USB)
Rev. 3.00 Sep. 28, 2009 Page 1193 of 1650
REJ09B0313-0300