DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 1320

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 24 LCD Controller (LCDC)
be 256 because the size has changed and the graphics driver software must be altered accordingly.
The point that corresponds to LDSARU moves from the upper left to the lower left of the display,
so LDSARU should be changed to 0x0c001000 + 256 * 319.
Note: Hardware rotation allows the use of an LCD panel that has been rotated by 90 degrees.
Rev. 3.00 Sep. 28, 2009 Page 1288 of 1650
REJ09B0313-0300
The settings in relation to the LCD panel should match the settings for the LCD panel
before rotation. Rotation is possible regardless of the drawing processing carried out by
the graphics driver software. However, the sizes in the image data and address offset
values which are managed by the graphics driver software must be altered.
2) Rotation mode
Picture image
LDSARU (start point)
LCD panel
Figure 24.9 Operation for Hardware Rotation (Rotation Mode)
Start point
LDSARU − LDLAOR × (HDCN × 8 − 2) − 1(end point)
End point
Scanning starts from LDSARU.
Scanning is done from large address
to small address of Y coordination.