DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 399

no-image

DS72030W200FPV

Manufacturer Part Number
DS72030W200FPV
Description
MPU, 32BIT, SH7203, ROMLESS, 240QFP
Manufacturer
Renesas Electronics America
Series
SH7200r
Datasheet

Specifications of DS72030W200FPV

Core Size
32bit
Program Memory Size
32KB
Cpu Speed
200MHz
Digital Ic Case Style
QFP
No. Of Pins
240
Supply Voltage Range
1.1V To 1.3V
Operating Temperature Range
-20°C To +85°C
Svhc
No SVHC
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Section 9 Bus State Controller (BSC)
9.5.9
PCMCIA Interface
With this LSI, areas 5 and 6 can be used for the IC memory card and I/O card interface defined in
the JEIDA specifications version 4.2 (PCMCIA2.1 Rev. 2.1) by specifying bits TYPE[2:0] in
CSnBCR (n = 5 and 6) to B'101. In addition, the bits SA[1:0] in CSnWCR (n = 5 and 6) assign the
upper or lower 32 Mbytes of each area to IC memory card or I/O card interface. For example, if
the bits SA1 and SA0 in CS5WCR are set to 1 and cleared to 0, respectively, the upper 32 Mbytes
of area 5 are used for IC memory card interface and the lower 32 Mbytes are used for I/O card
interface.
When the PCMCIA interface is used, the bus size must be specified as 8 bits or 16 bits using the
bits BSZ[1:0] in CS5BCR or CS6BCR.
Figure 9.41 shows an example of connection between this LSI and a PCMCIA card. To enable hot
swapping (insertion and removal of the PCMCIA card with the system power turned on), tri-state
buffers must be connected between the LSI and the PCMCIA card.
In the JEIDA and PCMCIA standards, operation in big endian mode is not clearly defined.
Consequently, the provided PCMCIA interface in big endian mode is available only for this LSI.
Rev. 3.00 Sep. 28, 2009 Page 367 of 1650
REJ09B0313-0300

Related parts for DS72030W200FPV