DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 802

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 15 Serial Communication Interface with FIFO (SCIF)
• Transmitting Serial Data (Asynchronous Mode)
Rev. 3.00 Sep. 28, 2009 Page 770 of 1650
REJ09B0313-0300
Figure 15.4 shows a sample flowchart for serial transmission.
Use the following procedure for serial data transmission after enabling the SCIF for
transmission.
Write transmit data in SCFTDR,
and read 1 from TDFE flag
Read TEND flag in SCFSR
Clear TE bit in SCSCR to 0
Read TDFE flag in SCFSR
and TEND flag in SCFSR,
Clear SPB2DT to 0 and
Figure 15.4 Sample Flowchart for Transmitting Serial Data
All data transmitted?
Start of transmission
End of transmission
set SPB2IO to 1
Break output?
then clear to 0
TEND = 1?
TDFE = 1?
Yes
Yes
Yes
Yes
No
No
No
No
[1]
[2]
[3]
[1] SCIF status check and transmit data
[2] Serial transmission continuation
[3] Break output during serial
In [1] and [2], it is possible to ascertain
the number of data bytes that can be
written from the number of transmit data
bytes in SCFTDR indicated by the upper
8 bits of SCFDR.
write:
Read SCFSR and check that the
TDFE flag is set to 1, then write
transmit data to SCFTDR, and read 1
from the TDFE and TEND flags, then
clear to 0.
be written is 16 - (transmit trigger set
number).
procedure:
To continue serial transmission, read
1 from the TDFE flag to confirm that
writing is possible, then write data to
SCFTDR, and then clear the TDFE
flag to 0.
transmission:
To output a break in serial
transmission, clear the SPB2DT bit to
0 and set the SPB2IO bit to 1 in
SCSPTR, then clear the TE bit in
SCSCR to 0.
The quantity of transmit data that can