DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 479

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.5.5
The notes on using the following flag bits are described here.
• DMA channel control register (CHCR)
• DMA operation register (DMAOR)
If a flag is read at the same timing it is set to 1, the read data will be 0, but the internal state may
be the same as reading 1. Therefore, if 0 is written to the flag, the flag will be cleared to 0 because
the internal state is the same as when writing 0 after reading 1.
In the case of using a flag, to prevent from unintentionally clearing the flag bit to 0, perform
read/write as follows:
(a) In the case of intended bit clear, write 0 to the flag bit after reading it as 1.
(b) In other cases, write 1 to the flag bit.
If a flag is not used, just writing 0 to the flag bit does not generate errors (in the case of intended
bit clear, write 0 to the flag bit after reading it as 1).
HE (Half-End) and TE (Transfer End Flag) bits
AE (Address Error Flag) and NMIF (NMI Flag) bits
Notes on Using Flag Bits
Section 10 Direct Memory Access Controller (DMAC)
Rev. 3.00 Sep. 28, 2009 Page 447 of 1650
REJ09B0313-0300