DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 749

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

14.4.4
Figure 14.4 shows how to use the alarm function.
Alarms can be generated using seconds, minutes, hours, day of the week, date, month, year, or any
combination of these. Set the ENB bit in the register on which the alarm is placed to 1, and then
set the alarm time in the lower bits. Clear the ENB bit in the register on which the alarm is not
placed to 0.
When the clock and alarm times match, 1 is set in the AF bit in RCR1. Alarm detection can be
checked by reading this bit, but normally it is done by interrupt. If 1 is set in the AIE bit in RCR1,
an interrupt is generated when an alarm occurs.
The alarm flag is set when the clock and alarm times match. However, the alarm flag can be
cleared by writing 0.
Alarm Function
Disable alarm interrupt
Enable alarm interrupt
(wait for interrupt or
Monitor alarm time
check alarm flag)
Clear alarm flag
Set alarm time
Clock running
Figure 14.4 Using Alarm Function
Write 0 to AIE in RCR1
to prevent errorneous interrupt
Always clear, since the flag may have been
set while the alarm time was being set.
Write 1 to AIE in RCR1
Rev. 3.00 Sep. 28, 2009 Page 717 of 1650
Section 14 Realtime Clock (RTC)
REJ09B0313-0300