DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 263

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.3.4
(1)
In a write access in write-back mode, the data is written to the cache and no external memory
write cycle is issued. The U bit of the entry written is set to 1 and LRU is updated so that the hit
way becomes the latest.
In write-through mode, the data is written to the cache and an external memory write cycle is
issued. The U bit of the written entry is not updated and LRU is updated so that the replaced way
becomes the latest.
(2)
In write-back mode, an external bus cycle starts when a write miss occurs, and the entry is
updated. The way to be replaced follows table 8.4. When the U bit of the entry to be replaced is 1,
the cache update cycle starts after the entry is transferred to the write-back buffer. Data is written
to the cache, the U bit is set to 1, and the V bit is set to 1. LRU is updated so that the replaced way
becomes the latest. After the cache completes its update cycle, the write-back buffer writes the
entry back to the memory. The write-back unit is 16 bytes. Cache updates and write-backs to
memory are performed in wrap-around fashion. For example, if the value of the lower four bits of
an address that triggers a write miss is H'4, the value of the lower four address bits changes from
H'4 to H'8, H'C, and H'0, in that order, when cache updates or write-backs are performed.
In write-through mode, no write to cache occurs in a write miss; the write is only to the external
memory.
8.3.5
When the U bit of the entry to be replaced in the write-back mode is 1, it must be written back to
the external memory. To increase performance, the entry to be replaced is first transferred to the
write-back buffer and fetching of new entries to the cache takes priority over writing back to the
external memory. After the cache completes to fetch the new entry, the write-back buffer writes
the entry back to external memory. During the write-back cycles, the cache can be accessed. The
write-back buffer can hold one line of cache data (16 bytes) and its physical address. Figure 8.3
shows the configuration of the write-back buffer.
Write Hit
Write Miss
Write Operation (Only for Operand Cache)
Write-Back Buffer (Only for Operand Cache)
A (31 to 4):
Longword 0 to 3:
A (31 to 4)
Figure 8.3 Write-Back Buffer Configuration
Longword 0
Physical address written to external memory (upper three bits are 0)
One line of cache data to be written to external memory
Longword 1
Longword 2
Rev. 3.00 Sep. 28, 2009 Page 231 of 1650
Longword 3
REJ09B0313-0300
Section 8 Cache