MPC8313ZQADDC Freescale Semiconductor, MPC8313ZQADDC Datasheet - Page 85

• Manufacturer Part Number: MPC8313ZQADDC
• Description: Microprocessors - MPU 8313 REV2.2 PB NO ENC
• Manufacturer: Freescale Semiconductor

Specifications of MPC8313ZQADDC

• Processor Series: MPC8313
• Core: e300
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 133 MHz
• Program Memory Size: 16 KB
• Data Ram Size: 16 KB
• Interface Type: I2C
• Mounting Style: SMD/SMT
• Package / Case: PBGA
• Number Of Programmable I/os: 32
• Number Of Timers: 4

Freescale Semiconductor
•
•
•
— Supports operation as a stand-alone USB device
— Supports high-speed (480-Mbps), full-speed (12-Mbps), and low-speed (1.5-Mbps) operations.
— Supports USB on-the-go mode when using an external ULPI (UTMI+ low-pin interface) PHY,
— On-chip USB-2.0 full-/high-speed PHY with ULPI (UTMI+ low-pin interface)
— Supports Wake-on-USB, a method for bringing the device from standby mode to full operating
— Host and device support
Enhanced local bus controller (eLBC)
— Multiplexed and non-multiplexed 26-bit address and 8-/16-bit data operating at up to 66 MHz
— Four chip selects supporting four external slaves
— Variable memory block sizes (32 Kbytes to 4 Gbytes in FCM mode, 32 Kbytes to 64 Mbytes
— Supports boot from parallel NOR Flash and parallel NAND Flash
— Supports programmable clock ratio dividers
— Up to eight-beat burst transfers
— 16- and 8-bit ports
— Three protocol engines available on a per chip select basis:
— Default boot ROM chip select with configurable bus width (8 or 16 bits)
Integrated programmable interrupt controller (IPIC)
— Functional and programming compatibility with the MPC8349 interrupt controller
— Support for external and internal discrete interrupt sources
— Programmable highest priority request
— Four groups of interrupts with programmable priority
— External and internal interrupts directed to host processor
— Unique vector number for each interrupt source
Dual I
— Each controller operates up to 400 kHz
— Two-wire interface
— Multiple-master support
— Master or slave I
– Enhanced host controller interface (EHCI) compatible
– Supports one upstream-facing port
– Supports three programmable bidirectional USB endpoints
Low speed is only supported in host mode.
which includes both device and host functionality
mode
in UPM mode, and 32 Kbytes to 64 Mbytes in GPCM mode)
– General-purpose chip select machine (GPCM)
– Three user programmable machines (UPMs)
– NAND Flash control machine (FCM)
2
MPC8313E PowerQUICC™ II Pro Integrated Processor Family Reference Manual, Rev. 2
C interfaces
2
C mode support
Overview
1-5