R5S77631Y266BGV Renesas Electronics America, R5S77631Y266BGV Datasheet - Page 1212

• Manufacturer Part Number: R5S77631Y266BGV
• Description: IC SUPERH MPU ROMLESS 499BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R5S77631Y266BGV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 266MHz
• Connectivity: Audio Codec, I²C, MMC, SCI, SIM, SIO, SSI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 107
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 499-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 28 Serial Communication Interface with FIFO/IrDA Interface (SCIF/IrDA)
[Legend]
Notes: 1. Only 0 can be written, to clear the flag.
Rev. 2.00 May 22, 2009 Page 1142 of 1982
REJ09B0256-0200
Bit
0
2. In 2-stop-bit mode, only the first stop bit is checked for a value of 1; the second stop bit
3. As SCFTDR is a 16-byte FIFO register, the maximum number of bytes that can be
4. When a break is detected, the receive data (H'00) following detection is not transferred
5. SCFRDR is a 16-byte FIFO register. When RDF = 1, at least the receive trigger set
6. Equivalent to 1.5 frames with an 8-bit, 1-stop-bit format.
Bit Name
DR
etu: Elementary time unit (time for transfer of 1 bit)
is not checked.
written when TDFE = 1 is 16 − (transmit trigger set number). Data written in excess of
this will be ignored.
SCFDR indicates the number of data bytes transmitted to SCFTDR.
to SCFRDR. When the break ends and the receive signal returns to mark "1", receive
data transfer is resumed.
number of data bytes can be read. If all the data in SCFRDR is read and another read
is performed, the data value will be undefined. The number of receive data bytes in
SCFRDR is indicated by SCFDR.
Initial
Value
0
R/W
R/W*
1
Description
Receive Data Ready
In asynchronous mode, indicates that there are fewer
than the receive trigger set number of data bytes in
SCFRDR, and no further data has arrived for at least 15
etu after the stop bit of the last data received. This is
not set when using clocked synchronous mode.
0: Reception is in progress or has ended normally and
[Clearing conditions]
•
•
•
1: No further receive data has arrived
[Setting condition]
•
there is no receive data left in SCFRDR
Power-on reset or manual reset
When all the receive data in SCFRDR has been
read after reading DR = 1, and 0 is written to DR
When all the receive data in SCFRDR has been
read by the DMAC
When SCFRDR contains fewer than the receive
trigger set number of receive data bytes, and no
further data has arrived for at least 15 etu after the
stop bit of the last data received*
6