R5S77631Y266BGV Renesas Electronics America, R5S77631Y266BGV Datasheet - Page 812

• Manufacturer Part Number: R5S77631Y266BGV
• Description: IC SUPERH MPU ROMLESS 499BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R5S77631Y266BGV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 266MHz
• Connectivity: Audio Codec, I²C, MMC, SCI, SIM, SIO, SSI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 107
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 499-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 20 16-Bit Timer Pulse Unit (TPU)
20.4.5
In phase counting mode, the phase difference between two external clock inputs is detected and
TCNT is incremented/decremented accordingly. This mode can be set for channels 2, and 3.
When phase counting mode is set, an external clock is selected as the counter input clock and
TCNT operates as an up/down-counter regardless of the setting of bits TPSC2 to TPSC0 and bits
CKEG1 and CKEG0 in TCR. However, the functions of bits CCLR1 and CCLR0 in TCR, and of
TIOR, TIER, and TGR are valid, and compare match and interrupt functions can be used.
The previous set value (initial output value set before the timer was started in phase counting
mode) is output from the TPU_TO pin in TIOR.
When overflow occurs while TCNT is counting up, the TCFV flag in TSR is set; when underflow
occurs while TCNT is counting down, the TCFU flag is set.
The TCFD bit in TSR is the count direction flag. Reading the TCFD flag provides an indication of
whether TCNT is counting up or down.
Table 20.9 shows the correspondence between external clock pins and channels.
Table 20.9 Phase Counting Mode Clock Input Pins
Rev. 2.00 May 22, 2009 Page 742 of 1982
REJ09B0256-0200
Channels
When channel 2 is set to phase counting mode
When channel 3 is set to phase counting mode
Phase Counting Mode
A-Phase
TPU_TI2A
TPU_TI3A
External Clock Pins
B-Phase
TPU_TI2B
TPU_TI3B