R5S77631Y266BGV Renesas Electronics America, R5S77631Y266BGV Datasheet - Page 1828

• Manufacturer Part Number: R5S77631Y266BGV
• Description: IC SUPERH MPU ROMLESS 499BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R5S77631Y266BGV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 266MHz
• Connectivity: Audio Codec, I²C, MMC, SCI, SIM, SIO, SSI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 107
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 499-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 40 General Purpose I/O (GPIO)
Rev. 2.00 May 22, 2009 Page 1758 of 1982
REJ09B0256-0200
Bit
11
10, 9
8
7
6
Bit Name
PTSEL4B
PTSEL4
[10:9]
PTSEL48

PTSEL46
Initial
value
0
All 0
0
0
0
R/W
R/W
R/W
R/W
R
R/W
Description
Selects the pins for ST0_D0 to ST0_D07, ST0_START,
ST0_VALID, and ST0_CLK.
0: Inputs from PTL5 to PTL7 and PTM0 to PTM7 are
1: Inputs from PTJ1 to PTJ7, PTI2, PTI3, PTI6, and
These bits select the pin for MDIO0.
00: Input from PTL3 is used as ET0_ MDIO (only PTL3
01: Input from PTI1 is used as RMII0_ MDIO
10: Input from PTM0 is used as RMII0_ MDIO
11: Input from PTO3 is used as RMII0_ MDIO
Selects the pin for MDIO1.
0: Input from PTF2 is used as ET1_ MDIO (only PTF2
1: Input from PTO1 is used as ET1_ MDIO
Reserved
This bit is always read as 0, and the write value should
always be 0.
Selects the pins for RMII1_RX_ER, RMII1_CRS_DV,
RMII1_RXD1, and RMII1_RXD0.
0: Inputs from PTJ1 and PTJ3 to PTJ5 are used as
1: Inputs from PTH0, PTH1, PTH3, and PTH4 are used
used as ST0_D0 to ST0_D07, ST0_START,
ST0_VALID, and ST0_CLK, respectively
PTI7 are used as ST0_D0 to ST0_D07,
ST0_START, ST0_VALID, and ST0_CLK,
respectively
can be used when using GMII1 and MII1)
RMII1_RX_ER, RMII1_CRS_DV, RMII1_RXD1, and
RMII1_RXD0, respectively
as RMII1_RX_ER, RMII1_CRS_DV, RMII1_RXD1,
and RMII1_RXD0, respectively
can be used when using GMII0 and MII0)