R5S77631Y266BGV Renesas Electronics America, R5S77631Y266BGV Datasheet - Page 1559

• Manufacturer Part Number: R5S77631Y266BGV
• Description: IC SUPERH MPU ROMLESS 499BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R5S77631Y266BGV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 266MHz
• Connectivity: Audio Codec, I²C, MMC, SCI, SIM, SIO, SSI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 107
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 499-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit
16
15 to 10 
9
8
7 to 5
Bit Name Initial value R/W
CSC
LSDA
PPS

0
All 0
Undefined*
0
All 0
R/W
R
R/W
R/W
R
Description
ConnectStatusChange
This bit indicates a connection or disconnection event
has been detected. Writing 1 clears this bit. Writing 0
has no effect.
0: No connect/disconnect event.
1: Hardware detection of connect/disconnect event.
Note: If DeviceRemoveable is set, this bit resets to 1.
Reserved
These bits are always read as 0. The write value should
always be 0.
(read) LowSpeedDeviceAttached
This bit defines the speed (and bus idle) of the attached
device. It is only valid when CurrentConnectStatus is
set.
0: Full Speed device
1: Low Speed device
(write) ClearPortPower
Writing 1 clears PortPowerStatus bit. Writing 0 has no
(read) PortPowerStatus
This bit reflects the power state of the port regardless of
power switching mode.
0: Port power is off.
1: Port power is on.
Note: If NoPowerSwitching bit is set, the read value
(write) SetPortPower
Writing 1 sets PortPowerStatus bit. Writing 0 has no
effect.
Reserved
These bits are always read as 0. The write value should
always be 0.
effect
should always be 0.
Rev. 2.00 May 22, 2009 Page 1489 of 1982
Section 35 USB Host Controller (USBH)
REJ09B0256-0200