MPC561MZP56 Freescale, MPC561MZP56 Datasheet - Page 1232

• Manufacturer Part Number: MPC561MZP56
• Manufacturer: Freescale

Specifications of MPC561MZP56

• Cpu Family: MPC56x
• Device Core: PowerPC
• Device Core Size: 32b
• Frequency (max): 56MHz
• Interface Type: QSPI/SCI/SPI/UART
• Total Internal Ram Size: 32KB
• # I/os (max): 56
• Number Of Timers - General Purpose: 22
• Operating Supply Voltage (typ): 2.6/5V
• Operating Supply Voltage (max): 2.7/5.25V
• Operating Supply Voltage (min): 2.5/4.75V
• On-chip Adc: 2(32-chx10-bit)
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 388
• Package Type: BGA
• Program Memory Type: ROMLess
• Program Memory Size: Not Required
• Lead Free Status / RoHS Status: Not Compliant

Electrical Characteristics
The option B power-up sequence (excluding V
Thus the V
no adverse affects to the device.
The requirement that V
dual 2.6-V/5-V compliant pins and 2.6-V pins. The diodes are forward biased when V
V
Figure F-5
power-up sequence if a keep-alive supply is required. The keep-alive supply should be powered-up at the
same time or before both the high voltage and low voltage supplies are powered-up.
The option B power-down sequence (excluding V
F-16
DDH
1. V
1. The V
and will start to conduct current.
group, with no adverse affects to the device.
DDH
DDH
illustrates the power-up sequence if no keep-alive supply is required.
V
DDL
> V
DDKA
supply group can be fully powered-up prior to power-up of the V
DDL
supply group can be fully powered-down prior to power-down of the V
Figure F-5. Option B Power-Up Sequence Without Keep-Alive Supply
Figure F-6. Option B Power-Up Sequence With Keep-Alive Supply
- 0.5 V (V
DDH
V
DDH
V
cannot lag V
DDH
cannot lag V
cannot lag V
MPC561/MPC563 Reference Manual, Rev. 1.2
DDH
cannot lag V
DDL
DDL
DDL
by more than 0.5 V
by more than 0.5 V is due to ESD diodes in the pad logic for
by more than 0.5 V
DDKA
DDKA
DDL
) is:
by more than 0.5 V)
0.5-V lag
0.5-V lag
) is:
Figure F-6
DDL
V
V
Freescale Semiconductor
DDH
DDL
V
V
supply group, with
DDL
DDH
DDL
DDH
is greater than
illustrates the
supply